Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
4
1
2
3
EMPTYING THE COLLECTION TANK
WARNING: ALWAYS DISCONNECT THE PLUG FROM THE POWER OUTLET BEFORE
REMOVING THE POWERHEAD FROM COLLECTION TANK.
1. Verify that the power cord is disconnected from the outlet (Fig. 1).
2. Press down on the hose clip and disconnect the hose from the vacuum (Fig. 2).
3. Undo the latches and remove the powerhead from the collection tank (Fig. 3). Place the
powerhead on a soft, clean surface upside down.
4. Clear all dirt or debris from the collection tank and hose into a proper waste container (Fig. 4).
6. Check the hose, accessories, and power cord to ensure that they have not been damaged.
7. Place the powerhead back onto the collection tank and secure latches.
IMPORTANT!
ALWAYS USE THE
CARTRIDGE FILTER FOR DRY VACUUMING.
NOTICE!
tears; replace it immediately.
STORAGE
Before storing your vacuum, the collection tank should be emptied and cleaned. The cord should
be wrapped then hung on the power cord storage. The hose and accessories should be cleaned
and stored so they can be readily available when needed. Store the wet/dry vacuum indoors.
REPAIRS
only identical replacement parts.
14
Publicidad
