Publicidad
Idiomas disponibles
Idiomas disponibles
545150017
Before assembly, make sure all packing materials are removed.
•
Tighten all connections after assembling the appliance.
•
If any part is missing or damaged, do not attempt to assembly this product. Contact customer
•
service for replacement parts.
To improve stability the preassembled base can be filled with sand (not included).
•
ASSEMBLING THE APPLIANCE
1. Line up the holes on the bracket of the wheel (17) with the corresponding holes on the base, then
insert 2 M8 x 16 mm bolts (DD) through the holes. Tighten with 2 M8 flange nuts (EE).
Secure the 3 base stands to the base using the preassembled 6 bolts M5 x 14, Φ5 washers and lock
washers.
EN
5
Publicidad
