545150017
This heater is intended for outdoor use only. Always ensure that adequate fresh air ventilation
•
is provided.
•
Always maintain proper clearance to combustible materials, i.e. top 915 mm and sides 915 mm
minimum.
•
The heater must be placed on firm level ground.
OPERATION
BATTERY (RE)PLACEMENT
Remove the impulse ignition cap from the burner (15) by turning the cap counterclockwise. Install 1
AAA battery, the negative end of battery goes in first. Now place the impulse ignition cap back by
turning the cap clockwise.
TO TURN ON THE APPLIANCE
ATTENTION: Before first use and after every gas cylinder change, the gas delivery system must be
purged of air before igniting! To do this, turn the control knob anti-clockwise to the pilot setting. Press
the knob in and hold for 3 minutes before igniting.
EN
14