KitchenBrothers KB796 Manual De Instrucciones página 26

3. INSTRUCTIONS FOR USE
Make sure there are no foreign objects (e.g. packaging material) in the
slots before putting the product into operation.
3.1 Before first use
1. Clean the outside of the product with a damp cloth.
2. Place the removable crumb tray in the crumb tray slot.
3. Choose a suitable location to place the product:
• A flat, heat-resistant and non-flammable surface;
• At least 5 cm away from walls and/or the back of your countertop;
• At least 30 cm away from cabinets and/or shelves that may be above the product;
• Away from combustible materials, such as curtains and wall coverings;
• Away from any gas stove flame or electrical element.
4. Plug in the power cord. The slider lever will not lock if the product is not plugged
into an outlet.
5. Push the slider lever all the way down until it locks.
6. Run a toasting cycle. At the end of it, the slots will pop up and the product will
automatically turn off.
WARNING!
◊ Do not put bread or toast in the product when you first start using it! During the
first use, the new heat elements are preheated and any dust accumulated during
storage or manufacturing is burned off. It is normal for this burning to cause an
odor. After the first use, this odor will disappear.
3.2 Toasting bread
1. Remove the crumb tray, clean it and put it back.
2. Plug in the bread.
3. Place the slice of bread in a slot. If you want to toast 2 slices, place each slice in
one slot.
4. Use the knob to select the desired toasting setting. The higher the number, the
longer the bread is toasted and the browner it gets. Position 1 is very light and
position 6 is very dark.
5. Push the slider lever all the way down.
6. The blue light around the cancel button comes on and the heating elements heat
up.
7. When the selected level is reached, the slots pop up and the indicator light goes
out. The product turns off automatically.
26