cecotec BOLERO SQUAD 2001 Manual De Instrucciones página 72

ENGLISH
The fan motor produces
unusual noises.
Cookware does not heat
up and does not appear
on the display.
When you try to heat
both cooking areas, the
display shows 'u'.
Heating stops suddenly
during operation and the
display shows a flashing
"u".
72
The motor fan is damaged.
The induction hob does not
detect the cookware because
it is not suitable for induction
cooking.
The induction hob does not
detect the cookware because it
is too small for the cooking zone
or is not centred in it.
The power board and the
board connected to the display
malfunction.
The display board of the
communication unit is damaged.
The main board is damaged.
The cookware is not suitable.
The cookware diameter is too
small.
The hob has overheated.
The cookware detection circuit
is damaged.
Replace the fan.
Only use cookware designed
for induction hobs. Check
the 'Selection of the suitable
cookware' section.
Centre the cookware and make
sure its base matches the size
of the cooking zone.
Check the connections.
Replace the display board.
Replace the power board.
Use a suitable cookware.
The unit has overheated. Wait
for the hob temperature to
return to normal.
Press the Power button to
restart the product.
Replace the power board.