Publicidad
Idiomas disponibles
Idiomas disponibles
14. Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
15. Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing, and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
16. If devices are provided for the connect on of dust extraction
connected and properly used. Use of dust collection can reduce dust-related hazards.
Power tool use and care
17. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
18. Do not use the power tool if the switch does not turn It on and off. Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
19. Disconnect the plug from the power source and/or the battery pack from the power tool before making any adjustments,
changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the power tool
accidentally.
20. Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
21. Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that
may affect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are caused by
poorly maintained power tools.
22. Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and
are easier to control.
23. Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the working
conditions and the work to be performed. Use of the power tool for operations different from those intended could result in
a hazardous situation.
CORDLESS IMPACT DRILL
SAFETY WARNINGS
1. Use auxiliary handle(s), If supplied with the tool. Loss of control can cause personal injury.
2. Hold
power tool by Insulated gripping
surfaces, when performing an operation where the cutting accessory may contact hidden wiring. Cutting accessory
contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electric shock.
3. Hold
power
tool by insulated gripping surfaces, when performing an operation where the fastener may contact
hidden wiring. Fasteners contacting a "live• wire may make exposed metal parts of the power tool "live" and could give the
operator an electric shock.
and collection facilities, ensure these are
2
YEAR
1
WARRANTY
2
Publicidad
