Furius FIRE 21 Manual De Usuario página 21

OPERATION
Installing Bits
Always remove the battery before inserting or removing bits. Select the proper style and size bit for the job. This tool is
equipped with a spindle lock. The chuck can be tightened with one hand, creating higher grip strengths on the bit.
1. To open the chuck jaws, turn the sleeve in the counterclockwise direction. When using drill bits, allow the bit to strike the
bottom of the chuck. Center the bit in the chuck jaws and lift it about 1/16" off of the bottom. When using screwdriver bits,
insert the bit far enough for the chuck jaws to grip the hex of the bit.
2. To close the chuck jaws, turn the sleeve in the clockwise direction. The bit is secure when the chuck makes a ratcheting
sound and the sleeve cannot be rotated any further.
3. To remove the bit, the sleeve in the counterclockwise direction.
NOTE: A ratcheting sound may be heard when the chuck is opened or closed. This noise is part of the locking feature, and
does not indicate a problem with the chuck's operation.
OPERATIONS
Selecting Drill or Drive Action
1. To use the drilling mode, rotate the torque selector collar until the drill symbol appears in line with the arrow
2. To use the impact drill mode, rotate the torque selector collar until the impact drill symbol appears in line with the arrow
3.To use the driving mode rotate the torque selector collar until the desired clutch setting appears in line with the arrow. The
adjustable clutch, when property adjusted will slip at a present torque to prevent driving the screw too deep into different
materials and to prevent damage to the screw or tool.
6
YEAR
WARRANTY