Furius FIRE 21 Manual De Usuario página 22

The torque specifications shown here are approximate values obtained with a fully charged battery pack.
NOTE: Because the settings shown in the table are only a guide, use a piece of scrap material to test the different clutch
settings before driving screws into the work piece.
Using the Control Switch
The control switch may be set to three positions: forward, reverse and lock. Due to a lockout mechanism, the control switch
can only be adjusted when the ON/OFF switch is not pressed. Always allow the motor to come to a complete stop before
using the control switch. For forward (clockwise) rotation, Push in the con troll switch from the right side of the tool. Check the
direction of rotation before use.
HOW TO SELECT THE TORQUE COLLAR?
Clutch
N.m
Setting
1 - 3 1 3- 14
4 - 6 15 - 17
7 - 9 17 - 21
10 - 13 22 - 26
14 - 17 27 - 31
18 35
Aplications
Small screws in softwood.
Medium screws in softwood or small
screws in hardwood.
Large screws in softwoods.
Medium screws in hardwood or large
screws in hardwood with pilot hole.
7
YEAR
1
WARRANTY