Parkside PRFMA 20-Li A1 Instrucciones De Funcionamiento página 41

Problem
No sound
Playback via Blue-
tooth not possible
®
Jobsite radio is not
displayed on the
mobile end device
Possible cause
Radio is set too quiet
The radio's mute function is
activated
Bluetooth not activated on
®
mobile end device
Jobsite radio not selected as
playback medium on mobile
end device
Device already coupled with
another mobile end device
Bluetooth module defective
®
The Jobsite radio and mobile
end devices are outside of the
transmission range
Mobile end device does not
support the Bluetooth
ard of the Jobsite radio
Error correction
Increase volume (see "Setting the
volume" in "Operation" chap-
ter")
Check whether the mute function
is active. The active mute func-
tion is shown on the display (2).
Deactivate the mute function by
pressing the Mute button (13)
Activate Bluetooth
tings of the mobile end device
Select Jobsite radio in the Blue-
tooth
®
device
Disconnect mobile end devices
in range of the Jobsite radio
Repairs must be carried out by
our Customer Service depart-
ment.
Reduce the distance between the
Jobsite radio and mobile end
device
stand- Use a newer mobile end device
®
GB
in the set-
®
settings of the mobile end
MT
41