Descargar Imprimir esta página

Bestron AHM1000 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 18
OPERATION - Before use for the first time
1. Unpack the appliance. Remove all packaging thoroughly.
2. Clean the appliance (see 'Cleaning and maintenance').
OPERATION - Using your power mixer
1. Attach the accessories to the appliance (see 'Fitting the accessories').
2. Insert the plug into the plug socket
3. The device is equipped with 6 speed settings and a turbo function. Always start stirring or mixing in
position 1 before moving to position 6. To mix heavy preparations, we recommend that you only
use the appliance in position 6.
4. You can also accelerate the speed by pressing the turbo function (8): this function only works with the
positions 1 to 5. However, we recommend that you use this mode only for a short time (maximum 30
seconds for heavy preparations).
5. Switch off the appliance by turning the speed dial to position '0'.
WARNING:
The mixer may not be used for more than 5 consecutive minutes. Then wait 20 minutes to allow the
appliance to cool down.
OPERATION - Attaching the accessories
You must always attach the accessories before switching on the mixer. The mixer is supplied with the
following accessories:
- Two whisks: these can be used to beat/mix egg white, whipped cream, mayonnaise, pudding, purée and
light types of dough;
- Two dough hooks: these can be used to mix heavier types of dough, such as dough for bread.
WARNING:
Switch off the appliance (turn the speed dial to the '0' position) and remove the plug from the wall
socket before you attach the accessories.
Insert the shaft of the accessory in the opening on the underside of the mixer. The pins projecting from the
accessory fit in the recess. Press the accessory into the opening; a 'click' will be heard when the accessory
locks in position. Use the same procedure to fit the second accessory.
OPERATION - Removing the accessories (see image 2 on page 2)
WARNING:
Switch off the appliance (turn the speed dial to the '0' position) andremove the plug from the wall socket
before you remove the accessories.
If the speed dial is not turned to position "0", you cannot remove the
cannot be pressed to release the attachments.
To remove the accessories hold them with one hand whilst pressing the release button with the other hand.
CLEANING AND MAINTENANCE
1. Remove the plug from the wall socket.
2. Remove the accessories from the appliance (see 'Removing the accessories'). You can clean the
accessories in washing-up solution, or place them in a dishwasher. Rinse the accessories with ample
water, and dry them thoroughly.
3. Clean the motor housing of the appliance with a damp cloth. After cleaning, dry it thoroughly.
4. Store the appliance.
WARNING:
Verify that the plug is out of the socket before you clean it.
Clean the accessories after each use.
Never use corrosive or scouring cleaning agents or sharp objects (such as knives or hard brushes) to
clean the appliance.
Do not immerse the motor unit in water, or in other liquids.
attachments. The release button
14
14
EN
EN

Publicidad

loading