Publicidad
Idiomas disponibles
Idiomas disponibles
Preparation
Use Type I (normal) tapes only.
Set the tape to the point where recording will start.
1 Insert the tape to be recorded on into deck 1.
Insert the tape with the side to be recorded on first facing out
from the unit,
2 Press function (CD, TAPE, TUNER or VIDEO/AUX)
and prepare the source to be recorded.
To record from a CD, press CD and load the disc(s)
3
TQecord
from a tape, press TAPE. Then insert the original
tape into deck 2 and play it.
To record
lfrom a
radio broadcast, press TUNER/BAND and
tune in to a station.
lkrecord
from a connected source, press VIDEO/AUX.
press
O to start
recording.
-
is depressed simultaneously,
When recording from a connected source, start playback of
the :source.
When the selected function is CD, playback and recording
start simultaneously.
To stolp recording, press W=
on deck 1.
To paulse recording, press II on deck 1. To resume recording,
press it again.
To record selected tracks of the CD
Before pressing
, program the tracks (see page 9).
To start recording precisely (except when recording from
a CD)
Before pressing
at step 3 above, press II on deck 1. Then,
press
.The deck enters recording pause mode. To restart
recording, press 1I again.
To record part of the CD
When
is pressed, recording always starts from the first track,
To start in the middle of a track, play the CD first and press II for
CD at the point to start recording from, Then, press O .The pause
mode for CD is released automatically and recording starts.
f
\
About cassette tapes
To prevent accidental erasure, break off the plastic tabs
on the cassette tape after recording with a screwdriver or
other pointed tool.
Side A
To record on the tape again, cover the tab openings with
adhesive tape, etc.
120-minute or longer tapes are extremely thin and easily
deformed or damaged. They are not recommended.
Take up any slack in the tape with a pencil or similar tool
before use. Slack tape may break or jam in the mechanism,
m
Do not press the buttons on deck 2 during recording.
Sound adjustment
during recording
To erase a recording
The output vcllume and tone of the speakers or headphones are
1
Insert the tape to be erased into deck 1 and press TAPE.
freely varied without affecting the recording.
2 Set the tape to the point where the erasure is to be started.
3 Press
to start the erasure.
ENGLISH 11
Publicidad
