Publicidad
Idiomas disponibles
Idiomas disponibles
CD EDIT/CHECK
AOPEN/CLOSE
DISC DIRECT pLAY
WRANDOM/
DISC CHA'NGE
Press CD, then press A OPENICLOSE
to open the
disc compartment.
Load disc(s) with the label side
up.
To ~lav one or two discs, place the discs on tray 1 and 2.
To rdav three discs, press DISC CHANGE to rotate the trays
after placing two discs. Place the third disc on tray 3.
Close the disc compartment by pressing A OPEN/CLOSE.
DISC C'HANGE
Tray number of the disc to be played
Total number of tracks
Total playing time
Load discs.
To play all discs in the disc compartment,
press >.
Play begins with the disc on tray 1.
Number of track
Elapsed playing
being played
time
To play one disc only, press DISC DIRECT PLAY 1-3.
The selected disc is played once.
To stop play, press W.
To pause play, press II. To resume play, press again.
To search for a particular point during playback, keep <
or -
pressed and release it at the desired point.
To skip to the beginning of a track during playback, press
U
or *
repeatedly.
To remove discs, press A OPEN/CLOSE.
To start play when the power is off (Direct Play Function)
Press CD. The power is turned on and play of the loaded disc(s)
begins.
When 4 OPEN/CLOSE is pressed, the power is also turned on
and the disc compartment is opened.
To check the remaining time
During play, press CD EDIT/CHECK while pressing SHIFT on
the remote control. The amount of time remaining until all tracks
finish playing is displayed. To restore the playing time display,
repeat the above.
Selecting a track with the remote control
1
2
Press DISC DIRECT PLAY 1-3 to select a disc.
Press numbered buttons O-9 and +1O to select a track.
Example:
To select the 25th track, press +1O, +1O and 5.
To select the 10th track, press +10 and 0.
The selected track starts to play and continues to the end of
that disc.
Replacing discs during play
While one disc is playing, the other discs can be replaced without
interrupting
play.
1 Press DISC CHANGE.
2 Remove the discs and replace with other discs.
3 Press 4 OPEN/CLOSE to close the disc compartment.
. When loading an 8-cm (3-inch) disc, put it onto the inner circle
of the tray.
Do not place more than one compact disc on one disc tray.
Do not tilt the unit with discs loaded.
Doing so may cause
malfunctions.
Do not use irregular shape CDs (example: heart-shaped,
octagonal ones). It may result in malfunctions.
8
ENGLISH
Publicidad
