DJI C10000 Guía De Usuario página 9

2. Connect the slow charging cable with the conversion cable, and then connect to a power outlet.
2
3. Connect the power supply to the battery using the same method described in the Fast Charging
section.
4. When charging is finished, disconnect the slow charging cable from the power outlet and then
disconnect the conversion cable from the power supply.
Updating Firmware
There will be notifications when firmware updates are available on the DJI website. Pay attention to
the Download page of the product on the DJI website to get the latest firmware. Follow the instructions
below to update the firmware of the power supply using the remote controller.
1. Connect the remote controller to the internet and then connect the power supply to the remote
controller using a USB-C cable.
2. Run the DJI Agras app on the remote controller and update the firmware by following the instructions.
Storage and Maintenance
Storage
When you are not using the power supply, disconnect the power supply from AC power and
disconnect the charging cable from the battery. Place the power supply in a stable place.
• DO NOT place the power supply under direct sunlight or in rain or other wet environments.
• Keep the power supply away from heat, pressure, water, flammable gases, and corrosives.
Maintenance
Clean the dustproof cover regularly to ensure the heat dissipation performance.
1. Remove the four screws and remove the dustproof cover.
2. Clean the dustproof cover and install it back in place. Install the four screws to secure the dustproof
cover.
1
7