Publicidad
Idiomas disponibles
Idiomas disponibles
11
Instructions for unpacking and wall mounting
Unpack your package and find the heater along with the wall mount accessory package.
1) Mark the positions of the four holes to be drilled on the wall. (Better install the heater 20 cm
to l 00 cm above the floor for the best performance.)
2) Drill the holes with the drill from the accessory package.
3) Insert the plastic rails into the holes.
4) Install the surface heating on the four rail fasteners that match the four holes in the heater.
5) Screw the four mounting screws into the plastic rails.
6) Place the caps on the mounting screws. It is recommended to use a normal adhesive to
glue the caps evenly to the screws.
7) To lower the device from the wall, simply open the caps, loosen the screws with a
screwdriver and remove the heater.
8) Make sure that the distance between the bottom of the heater and the floor when
installing the heater is at least 20 cm
Scope of delivery
1 x Heating
1 x Accessories Set:
1 x Drill (8mm)
4 x Rail mounting 4x screws
4 x Lid for screws l x Instruction manual
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
Publicidad
