Publicidad
Idiomas disponibles
Idiomas disponibles
13
Free-standing superstructure
1.) Place the free-standing feet on the floor, leave the slots of both feet in a line, keep a
distance of at least 12cm to the foot on the sehalter side and a similar distance to the other,
and easily insert the plate into the slots.
2.) Screw the two screws into the holes on the feet.
Follow the
steps
to
put theheater into
operation.
1.) Check the heater to make sure it is not damaged.
2.) Plug in the power plug and then turn on the illuminated ON/OFF switch.
3.) Set the temperature of the digital display to the desired comfort setting. The heater
switches off automatically as soon as the set comfort level is reached, st, and on again when
the comfort level falls below the set level. Note: The comfort level does not necessarily
correspond to the ambient temperature in Celcius.
4.) You can connect a 3-pin 24 hour clock to the wall outlet to add a timing function.
5.) If you do not want to use the device for a long time, please unplug it from the socket.
Electrical diagram
Control panel functions
www.eshopping.de
Hergestellt für Dilaw Warehouse GmbH // Fuggerstraße 15a // 48165 Münster // Germany
Publicidad
