2. Remove the two water lines (White for water
and the other for ice) by pressing the coupler
( 1 ) and pulling the water line ( 2 ) away.
Make sure the color
of the water lines
CAUTION
match.
CAUTION
When reconnecting the supply hoses, make sure
the same colored hoses are inserted with each
other.
2. DETACH THE HINGE COVER
1. Disconnect the power cord, and remove 3
cover screws using a Phillips screwdriver ( 1 ).
Then open the refrigerator door and pull the
hooks on the sides to loosen the cover ( 2 ).
Lift up the cover towards you to detach it
( 3 ).
- Detach the hinge cover with the door open and
then close the door once the hinge cover has
been detached.
( 1 )
( 2 )
DA68-02976A-10.indb 13
1
3. DISASSEMBLE THE FREEZER DOORS
2
1. Remove the hinge cover and then disconnect
2. Flip the clamp ( A ) up in direction 1 and then
3. Remove the hinge ( B ).
4. Lift up the door and detach it from the
English - 13
( 3 )
the electrical wire connector.
pull it off in direction 2.
A
A
B
refrigerator.
2018. 7. 9.
5:13