Samsung RH29H9000SR Manual De Instrucciones página 28

• Delay Appliance Load (L3): The refrigerator
responds to a DAL signal by providing a
moderate load reduction for the duration of the
delay period.
This function controls functions that consume
a large amount of energy such as adjusting the
Cooling system, performing the defrost cycle,
and making ice.
- When the refrigerator operates in DAL (L3)
mode, "L3" is displayed on the refrigerator
display.
- DAL mode is automatically deactivated after it
lasts for the received duration (max. 4.5 hours),
or when the Override key is pressed.
• Temporary Appliance Load Reduction (L4):
The refrigerator responds to a TALR signal by
aggressively reducing the load for a short time
period.
This function reduces energy consumption
by stopping the compressor and controlling
the functions that consume a large amount of
energy such as the defrost cycle and making
ice.
- When the refrigerator operates in TALR (L4)
mode, "L4" is displayed on the refrigerator
display.
- TALR (L4) mode is automatically deactivated
after it lasts for the received duration (max. 15
minutes), or when the Override key is pressed.
The mode is immediately deactivated and the
refrigerator returns to the normal state when
the door is opened or closed, or the dispenser
is used.
Override Mode
When you want the refrigerator to ignore the
SMART GRID (Demand Response) signal from
the Utility Company, you can activate OVERRIDE
mode.
When you activate OVERRIDE mode, the
refrigerator ignores the SMART GRID (Demand
Response) signal and is not controlled by the Utility
Company.
DA68-02976A-10.indb 28
Activating and deactivating Override
mode
1. Press and hold the [Energy Saver] button for 3
seconds.
2. A buzzer sounds and `Or' and `on' is displayed
on the freezer and fridge temperature displays
for 5 seconds.
3. If the refrigerator receives a SMART GRID
(Demand Response) signal from the Utility
Company, `Or' is displayed in the freezer
temperature display.
4. To deactivate OVERRIDE mode, press and hold
the [Energy Saver] button for 3 seconds.
5. A buzzer sounds and 'Or' and 'oF' is displayed
on the freezer and fridge temperature displays
for 5 seconds.
Alternatively, you can activate or
deactivate OVERRIDE mode using the
Samsung E-Smart App.
English - 28
2018. 7. 9. 5:14