Samsung RH29H9000SR Manual De Instrucciones página 18

HOW TO ADJUST THE GAP
BETWEEN THE DOORS
If the gap between the refrigerator door and the
freezer door is uneven:
• Use the gap adjustor located at the top of the
refrigerator door (right side).
• Excessive force can cause the adjustor bolt to
break.
1. Remove the refrigerator
door's hinge cover.
- Detach the hinge cover with
the door open and then close
the door once the hinge
cover has been detached.
2. Adjust the gap using a 4 mm Allen wrench (not
included).
3. Rotate the bolt clockwise (
the gap. Rotate it counterclockwise (
narrow the gap.
Adjust until the gap between the refrigerator
door and the freezer door appears even.
CAUTION
When arranging the cables, take caution not to
tear or peel off the cable coating.
DA68-02976A-10.indb 18
HOW TO ADJUST THE GAP
BETWEEN THE REFRIGERATOR
DOOR AND THE REFRIGERATOR
BODY
If the gap between the refrigerator door and the
refrigerator is uneven :
• Use the adjustors located at the top edge of
the refrigerator, inside each door.
1. Open the door where the gap with the
refrigerator is narrower and then turn the
adjustor counterclockwise (
is even.
) to widen
) to
2. Once the gap between the door and the
refrigerator has been adjusted, turn the adjustor
nut clockwise (
place.
English - 18
) until the gap
Adjustor
) to lock the adjustor in
Locking Nut
2018. 7. 9. 5:14