Dometic SANITATION MASTERFLUSH MF7100 Instrucciones De Montaje página 7

Macerator Toilet
4 General information
The images used in this document are for
reference purposes only. Components and
component locations may vary according to
specific product models. Measurements may
vary ±0.38 in. (10 mm).
4.1 Components
Packaging contents (Figure 1 on page 2)
1 Macerator toilet
2 DFS-2F flush switch (standard -
freshwater flush toilet)
3 DFS-1F flush switch (standard - raw
water flush toilet)
4 1.5 in. (38 mm) discharge fitting
5 Floor mounting hardware kit
6 Water supply hose kit
Parts list
1
Quick start guide
Not shown
1
Toilet components (Figure 2 on page 2)
1 Rim flush check valve (freshwater toilet)
or adapter (raw water model)
2 Water supply hose
3 Macerator pump (under plastic cover)
4 Electric water valve (raw water model)
5 Product ID label location
6 Stainless steel compression band
7 Discharge fitting
EN
1
4.2 Toilet system layouts
4.2.1 Above water line system
Toilet with direct overboard discharge
(Figure 5 on page 3)
1 Seacock
2 1.0 in. (25 mm) or 1.5 in. (38 mm) ID
hose
3 Make loop 12.0 in. (305 mm) above
the floor to retain water in the bowl
4 Macerator toilet
5 Freshwater supply
0.5 in. (13 mm) ID fresh water line
6 From fresh water supply
7 Seawater supply
8 0.75 in. (19 mm) ID hose
9 Check valve ensures that pump stays
primed
Toilet with holding tank discharge
(Figure 6 on page 3)
1 Seacock
2 Add vented loop if holding tank is
below the water line
3 Vent fitting
4 Discharge pump
5 Vent filter
6 Holding tank (cut-away view)
7 Deck discharge
8 Optional full tank level float
9 1.0 in. (25 mm) or 1.5 in. (38 mm) ID
hose
10 Make loop 12.0 in. (305 mm) above
the floor to retain water in the bowl
11 Macerator toilet
12 Freshwater supply
0.5 in. (13 mm) ID fresh water line
13 From fresh water supply
14 Seawater supply
15 0.75 in. (19 mm) ID hose
16 Check valve ensures that pump stays
primed
General information
7