Publicidad
Idiomas disponibles
Idiomas disponibles
3
MARK DRILL LOCATIONS
• Place LEVEL (1) over MOUNTING PLATE (2).
• Push MOUNTING PLATE (2) and LEVEL (1)
over SUPPLY PIPE (3).
• Confirm that MOUNTING PLATE (2) is level by
checking LEVEL (1).
• Using HOLES (4) as a template, mark the two
locations to be drilled.
• Remove LEVEL (1).
4
DRILL WALL ANCHOR HOLES
• Using a 1/2" drill bit, drill holes at the
locations marked in step 1.
3
2 4
5
1
5
Publicidad
