Control Panel; Main Screen; Active Components - ECOFOREST ecoSMART e-source Manual Deusuario, Instalador Y Servicio Técnico

5.1. Control panel

The e-source control panel has a screen with 6 buttons, like the one shown in the illustration below. The buttons are used to move
through the various user menus and to adjust the parameters.
The general functions and operation of each of the buttons are indicated below.
The ALARMS menu can be accessed directly from anywhere in the application.
The list of user menus can be accessed from anywhere in the application.
The user can return to the previous menu from anywhere in the application.
This allows the user to move through the menu lists.
This allows the user to move from one screen to another inside a menu.
This is used to adjust the settings of the parameters contained in a screen.
This allows the user to access the selected menu.
This is used to move from one adjustable parameter to another in the same screen.
This is used to access the INFORMATION menu directly from the main screen.

5.2. Main screen

The main screen of the application contains a series of fields with information about heat pump operation.
Status
Main brine pump
activated

5.3. Active components

This field shows the main components that are activated. A consumption bar is also shown for the fan and modulating circulator
pumps.
Figure 5.1. Control panel.
Figure 5.2. Description of the main screen.
52
ecoSMART e-source
user, installer and technical service manual
Date and time
Brine source collector
Activated sources