Descargar Imprimir esta página

Brandson 306643 Manual Del Usuario página 28

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

5. Start-up
Remove the product from the packaging and remove all packaging material. Open
the battery compartment of the outdoor sensor and insert 2x 1.5V AAA batteries.
Then open the battery compartment on the back of the main unit and insert 3x
1.5V AAA batteries. Alternatively, you can use the supplied 5V / 1A hollow plug
power supply unit for operation. To do this, plug the power supply unit into a
properly connected socket and connect it to the hollow plug connection on the
main unit.
Note: If you want to use the device with batteries, the display light is not per-
manently switched on. The display illumination is only permanently switched
on when the device is operated with the enclosed mains adapter.
The weather station then attempts to connect to the outdoor sensor. Make sure
that both devices are within range of each other. The connection symbol „" flashes
in the „Outdoor temperature display" of the main unit. Then press the „TX" button
in the battery compartment of the outdoor sensor to establish the connection. If
the main unit is unable to establish a connection to the outdoor sensor within 3
minutes, the search is cancelled. The connection symbol stops flashing and the
temperature display shows „-._°C" and „-._%" on the display.
In most cases, the connection cannot be established due to certain factors, such
as reinforced walls or too great a distance between the sensor and the main unit.
In this case, position the sensor and the main unit closer to each other. To restart
detection, press and hold the „CH" button on the back of the main unit for approx.
3 seconds until the connection symbol flashes on the display. Then press the „TX"
button in the battery compartment of the outdoor sensor to establish the connec-
tion.
6. Time signal
The time signal is received by the weather station when you connect the weather
station to the Internet via the app.
Alternatively, you have the option of setting the time manually. You can find out
more about this in the „Basic settings" section.
28
English

Publicidad

loading