Brandson 306643 Manual Del Usuario página 32

Low battery level:
Outdoor temperature display:
Channel display
The weather station receives the signal from the outdoor
sensor automatically after all settings have been made. You can
switch between the different channels using the „CH" button.
The channels of the outdoor sensor can be selected directly on
the device using a switch.
1, 2, 3: Channel of the outdoor sensor
8. Basic settings
Note: Pressing the „WIFI/LIGHT/SNOOZE" button switches on the backlight.
Please note that the base station does not respond to 2 buttons at the same
time. We therefore recommend that you only press one button at a time.
32
If the battery symbol appears, the inserted batteries
are empty and should be replaced with new ones as
soon as possible. This applies to both the outdoor
sensor and the base station.
The outdoor temperature is measured
by the outdoor sensor and displayed
with an accuracy of up to a tenth of
a degree. The set temperature unit
appears to the right of the measured
value. The temperature unit can be
changed between °C and °F. To do this,
press the „-" button on the back of the
weather station.
English