Brandson 306643 Manual Del Usuario página 33

Press and hold the „MODE" button for about 3 seconds to adjust the basic set-
tings. You can use the „+" and „-" buttons to adjust the values accordingly.
Briefly press the „MODE" button in the time settings to confirm the entry and
move on to the next option. In this way, you can change and adjust the following
settings in the following order:
• Year
• Month
• Day
• 12 or 24 hour display
• Hour
• minute
8.1 Alarm setting
The weather station can save up to 3 alarm settings, which can be switched on
and off separately.
Set alarm
Press the „ALARM" button to display the alarm time. There are various alarm
settings above the alarm time. Select the desired alarm time (1, 2 or 3) and then
press and hold the „ALARM" button for approx. 3 seconds to access the alarm
settings. Use the „+" and „-" buttons to make the desired settings. Then press the
„ALARM" button again to save the set alarm. You can adjust these settings with
Alarm 1, Alarm 2 and Alarm 3.
Activate alarm
Press the „ALARM" button in clock mode. Alarm 1 is displayed. Press the „+"
or „-" button to switch the alarm on or off. If the corresponding alarm symbol
flashes, the alarm is deactivated. If the alarm symbol lights up continuously, this
means that the alarm is activated.
English
33