Publicidad
Idiomas disponibles
Idiomas disponibles
05 USING A WIRELESS
CONNECTION
Connecting via Bluetooth
When in "Bluetooth" mode
5 Sec
"
• Search for the Bluetooth device on your TV or mobile
device.
→
SOUND
Red
MODE
Blue Blinks
WOOFER
Pairing
TONE
CH LEVEL
CONTROL
or
NOTE
ct
• If asked for a PIN code when connecting a Bluetooth
device, enter <0000>.
Connecting via Wi-Fi (Wireless
Network)
To connect a Soundbar to a mobile device via a wireless
network (Wi-Fi), the SmartThings app is required.
1. Connect your mobile device (smartphone, tablet, etc.)
to the Wi-Fi network the TV is connected to.
2. Install and launch the SmartThings app on your mobile
d
device (smartphone, tablet, etc.).
e-
3. Follow the instructions in the app screen on the mobile
device to connect the Soundbar to your Wi-Fi network.
OR
→
Green
Cyan Blinks X3
Connection is complete
"Ready to connect via Bluetooth."
06 TROUBLESHOOTING
Before seeking assistance, check the following.
Soundbar does not turn on.
• Check whether the power cord of the Soundbar is
correctly inserted into the outlet.
Soundbar works erratically.
• After removing the power cord, insert it again.
• Power cycle the external device and try again.
• If there is no signal, the Soundbar automatically turns
off after a certain period of time. Turn on the power.
OR
Remote control does not work.
• Point the remote directly at the Soundbar.
• Replace the batteries with new ones.
The red LED indicator light on the soundbar stays on.
• The microphone is turned off. Turn on the
microphone.
LED Indicator
The Soundbar does not output any sound.
• The volume of the Soundbar is too low or muted.
Adjust the volume.
• When any external device (STB, Bluetooth device,
mobile device, etc.) is connected, adjust the volume of
the external device.
• For sound output of the TV, select Soundbar.
(Samsung TV: Home (
All Settings (
Soundbar)
• Remove the cable from the Soundbar and then
reconnect it.
If the TV is not connected via HDMI (eARC).
• Check whether the HDMI cable is correctly connected
to the eARC terminal.
• Connection may not be possible due to the connected
external device (set-top box, game console, etc.).
Directly connect the Soundbar.
• HDMI-CEC may not be activated on the TV. Turn on
the CEC on the TV menu.
(Samsung TV: Home (
→ All Settings (
Manager → Anynet+ (HDMI-CEC) ON)
Red On
"Mic Off"
"Mic On"
) → Menu → Settings (
) → Sound → Sound Output → Select
) → Menu → Settings (
) → Connection → External Device
) →
)
English - 5
Publicidad
