Adjusting The Volume Balance Of Each Channel; Adjusting High/Low Frequency Sound (Tone Control); Configuring The Hdmi Settings; Changing The Brightness Of The Front Panel Display - Yamaha YHT-S401 Manual De Instrucciones

Adjusting the volume balance of
each channel
Menu: 1:SP LEVEL
Adjust the volume balance between the channels with test
tones output from each channel.
Sub menu:
"1-1:FRONT L" "1-2:FRONT R": Adjusts the output
level of the front speaker (left/right) channels.
"1-3:CENTER": Adjusts the output level of the center
speaker channel.
"1-4:SURROUND L" "1-5:SURROUND R": Adjusts the
output level of the virtual surround/surround speaker (left/
right) channels.
"1-6:SUBWOOFER": Adjusts the output level of the
subwoofer channel.
Adjustable range: –6 to +6 (Default setting: 0)
y
• You can also adjust the volume balance while playing the input
device. (☞ P. 12)
• As you complete each channel setting, press LEVEL to move to
the next channel for adjustment.
Adjusting high/low frequency
sound (tone control)
Menu: 2:TONE CONTROL
You can adjust the balance of the high frequency range
(Treble) and low frequency range (Bass) of sounds output
from the front speakers to obtain desired tone. When
headphones are connected, adjusts the balance of the high-
frequency range and low-frequency range of sounds
output from headphones.
Sub menu
"2-1:BASS": Adjusts the balance of the low frequency
range (Bass) of sounds output from the speaker.
"2-2:TREBLE": Adjusts the balance of the high frequency
range (Treble) of sounds output from the speaker.
Adjustable range: –6 to +6 (Default setting: 0)

Configuring the HDMI settings

Menu: 3:HDMI SETUP
You can configure the settings related to HDMI signals
and HDMI control function.
■ Switching HDMI control function
on/off
Sub menu: 3-1:CONTROL
You can set whether to use the HDMI control function.
For details, see "Operating the unit by TV's remote
control" (☞ P. 23).
Available options: OFF, ON (Default setting: OFF)
"OFF": Deactivates the HDMI control function. The
standby power consumption of this unit decreases.
"ON": Activates the HDMI control function.
y
To activate the ARC function, set "3-1:CONTROL" to "ON".
■ Setting the audio output
Sub menu: 3-2:AUDIO
You can select a component to play back HDMI audio
signals. This setting is effective when "3-1:CONTROL" is
set to "OFF".
Available options: AMP, TV (Default setting:
AMP)
"AMP": Outputs HDMI sound signals from the speakers
connected to this unit.
"TV": Outputs HDMI sound signals from the speakers of
a TV connected to this unit.
Changing the brightness of the
front panel display
You can change the brightness of the front panel display.
You can also turn off the front panel display to view a
movie in a darker environment.
The brightness of the front panel changes as follows.
Menu: 4:DISPLAY MODE
Adjustable range (Default setting: "DIMMER 0")
*
Selecting DISPLAY OFF turns off the front panel display after
exiting the setup menu.
Notes
• The front panel display lights up momentarily when any
operation is performed with DISPLAY OFF mode selected.
• Only the STATUS indicator remains lit in DISPLAY OFF
mode.
Setup menu
Bright
Dark
19
En