Fulgor Milano F6IRT487S1 Instrucciones Para La Instalación página 13

STEP 1
Install the backsplash (if provided) by the three screws on the
back and the toe kick
STEP 2
Slide the range top into place.
30'' (76,2 cm)
36'' (91,4cm)
9" 3"
STEP 3
Two clamp brackets are provided with your unit.
After rangetop has been installed into the countertop, install the
brackets on the burner box as shown.
step A place the clamping screws into brackets.
step B attach brackets by using the attachment screws on the
step C position brackets so that they are with the clamp screw
step D tighten attachment screws securely.
step E check that the front edge of the rangetop is parallel
DO NOT OVER TIGHTEN
4 - Installation Instructions
48'' (122,2 cm)
selected location of burner box, tighten screws just
enough to hold brackets in place.
in contact with the counter top bottom.
to the front edge of the countertop tighten the screw
clamping against the countertop.
EN
9