Publicidad
Idiomas disponibles
Idiomas disponibles
Troubleshooting
NOTE: Refer to the KOHLER Konnect ® App for settings and programming.
This troubleshooting guide is for general aid only. For service and installation issues
or concerns, refer to the "Customer Support" section for contact information for your
region.
Symptoms
1. The digital
control is not
lit.
1579645-K2-A
Probable Cause
A. The Anthem+ System
Controller is not plugged
into the electrical outlet.
B. The digital control cable
connections may be loose
or disconnected.
C. The circuit breaker has
tripped.
D. The Anthem+ System
Controller may require
resetting.
E. If none of the
recommended actions for
the above issues correct
the symptom, the digital
control or Anthem+
System Controller
requires servicing.
Recommended Action
A. Plug the Anthem+ System
Controller into an electrical
outlet.
B. Check all digital control
cable connections.
C. Reset the circuit breaker.
D. Disconnect and reconnect
the Anthem+ System
Controller power supply
from the electrical outlet.
E. Contact the KOHLER
Customer Care Center.
12
Kohler Co.
Publicidad
