Publicidad
Idiomas disponibles
Idiomas disponibles
8. After a short period of time the unit will automatically shut down.
9. When charging is complete, store the 120V AC/USB Charging
Adapter and the USB Charging Cable in a safe place.
CHARGING/RECHARGING USING THE SUPPLIED 12V DC/
USB CHARGING ADAPTER
IMPORTANT:
• The unit can only be charged and recharged through the First
USB-C Port.
• Always connect the 12V DC/USB Charging Adapter to the 12
volt DC power source (using the USB-C to USB-C Charging Cable)
BEFORE connecting it to the unit.
1. Make sure the unit is turned off (the Battery Status LED Indicators
are not lit).
2. Insert one USB-C plug of the USB-C to USB-C Charging Cable
into the 12V DC/USB Charging Adapter.
3. Insert the 12V DC/USB Charging Adapter into a vehicle's 12 volt
DC accessory outlet or other functioning 12V DC power source.
Note: Some vehicles require that the ignition be switched to the
accessory outlet position in order to power the accessory outlet.
4. Lift up the protective cover of the First USB-C Port (refer to the
"Features" section to locate). Insert the other USB-C Plug of the USB
Charging Cable into the unit's First USB-C Port.
5. When the unit is properly connected, the blue Battery Status LED
Indicators will gradually light up (from left to right) to indicate the unit
is charging.
6. Charge until all three blue Battery Status LED Indicators light.
7. Disconnect the USB Charging Cable from the 12V DC/USB
Charging Adapter and the unit.
8. After a short period of time the unit will automatically shut down.
9. When charging is complete, store the 12V DC/USB Charging
Adapter and the USB Charging Cable in a safe place.
CHARGING/RECHARGING USING THE USB CHARGING
CABLE AND A DEVICE WITH A USB POWER PORT (NOT
SUPPLIED)
IMPORTANT:
• The unit can only be charged and recharged through the First
USB-C Port.
• Always connect the USB Charging Cable to the external device's
USB Power Port BEFORE connecting it to the unit. A minimum 2A
USB power source is required in order to recharge the unit.
1. Make sure the unit is turned off (the Battery Status LED Indicators
are not lit).
2. Insert the USB-A plug or USB-C plug at one end of the USB
Charging Cable into an external device's functional USB Power Port.
3. Lift up the protective cover of the First USB-C Port (refer to the
"Features" section to locate). Insert the USB-C Plug of the USB
Charging Cable into the unit's First USB-C Port.
4. When the unit is properly connected, the blue Battery Status LED
Indicators will gradually light up (from left to right) to indicate the unit
is charging.
5. Charge until all three blue Battery Status LED Indicators light.
6. Disconnect the USB Charging Cable from the device's USB Power
Port and the unit.
7. After a short period of time the unit will automatically shut down.
8. When charging is complete, store the USB Charging Cable in a
safe place.
11
Publicidad
