Publicidad
OPERATION
In order not to overload the base motor, it is recommended to reduce the base
pressure when going from smooth floors to rough ones (ex. concrete).
Overflow Device
In order to avoid serious damages to the suction motor, the machine is equipped
with a float that intervenes when the recovery tank is full, closing off the suction
hose and stopping the suction.
When this happens, it is necessary to empty the recovery tank.
1. Remove the drain hose placed in the front part of the machine.
2. Take off the exhaust plug by pulling the lever and empty the recovery tank
into appropriate containers, according to the standard norms.
Low Detergent Solution Signal (H2o) On The Display)
When the indication H2O on the display appears, this means that the detergent is
getting low corresponding to 10% of the maximum capacity of the solution tank.
24
Publicidad
