Publicidad
FAULT DIAGNOSIS
The Base Motor Does Not Work
1. Verify that the key switch (1) is in the correct position. Switch off and on again
the machine.
2. Check the charge level of the batteries (2).
3. Check that the battery connector is correctly plugged in.
4. Verify that the switch (3) is on.
5. Act upon the levers drive control (4).
If the problem persists, please contact the authorized technical assistance.
The Traction Motor Does Not Work
1. Switch off and on again the machine (1).
2. Release the brake (2) until the signal lamp (3) comes off.
3. Act upon the levers drive control (4).
If the problem persists, please contact the authorized technical assistance.
34
Publicidad
