Klarstein GRANDCHEF Manual Del Usuario página 53

• In standby mode, press the MICROWAVE button to use the microwave function.
Turn the left-hand dial to set the microwave combination function. There are three
available combination modes. Turn the right-hand dial to set the temperature.
Touch the Time Setting button and adjust the time with the right-hand dial. Touch the
MICROWAVE button to set the microwave power.
• As a combination function, you can select the heating modes top and bottom heat,
double grill + convection and pizza mode. If you select another heating mode and
press the MICROWAVE button, the appliance will beep to indicate an error.
• You can cancel the combination function by pressing and holding the MICROWAVE
button for three seconds.
Note: The baking grid can be used for both the grill function and the microwave
function. The baking tray must not be used for the microwave function. The second
level is suitable for using the microwave function. Never use the microwave function if
there is no food inside the appliance.
Timer
• By pressing the TIMER button, the timer function can be used. When the time you set
has elapsed, the unit will beep.
• After pressing the TIMER button for the first time, set the hour, press the button again
and set the minute.
• Finally, confirm your setting by pressing the TIMER button again. You can set the
timer before and during preparation. If you select a function and the temperature,
the timer function is not available.
Parental lock
The device is equipped with a parental lock, which prevents accidental activation or
modification of the settings already made. If you press the PARENTAL LOCK button for
3 seconds, the parental lock is activated. If you press the PARENTAL LOCK button again
for 3 seconds, the parental lock will be deactivated. The child lock can be activated
both when the appliance is in the operating mode and when it is switched off. Once the
child lock is activated, a lock symbol is displayed on the screen. When the child lock is
activated, the microwave function cannot be cancelled.
EN
53