cecotec ENERGYSILENCE 1000 CYCLONE SMART Manual Del Usuario página 41

Idiomas disponibles

The power consumption in standby mode is 0.016 W using the guidelines of EN 50564:2011

and the European regulations 1275/2008/EC and 801/2013/EC. For this purpose, the device is

connected to the mains without performing any function, waiting for the standby mode to be

activated.

Technical specifications may change without prior notification to improve product quality.

Made in China | Designed in Spain

7. DISPOSAL OF OLD ELECTRICAL AND ELECTRONIC APPLIANCES

This symbol indicates that, according to the applicable regulations, the product

and/or batteries must be disposed of separately from household waste. When

this product reaches the end of its shelf life, you should dispose of the cells/

batteries/accumulators and take them to a collection point designated by the

local authorities.

Consumers must contact their local authorities or retailer for information concerning the

correct disposal of old appliances and/or their batteries.

Compliance with the above guidelines will help protecting the environment.

8. TECHNICAL SUPPORT AND WARRANTY

Cecotec shall be liable to the end user or consumer for any lack of conformity that exists at

the time of delivery of the product under the terms, conditions, and deadlines established by

the applicable regulations.

It is recommended that repairs be carried out by qualified personnel.

If at any moment you detect any problem with your product or have any doubt, do not

hesitate to contact the official Cecotec Technical Support Service at +34 963 210 728.

9. COPYRIGHT

The intellectual property rights over the texts in this manual belong to CECOTEC

in part, be reproduced, stored in a retrieval system, transmitted, or distributed by any means

(electronic, mechanical, photocopying, recording or similar) without the prior authorization of

CECOTEC INNOVACIONES, S.L.

ENERGYSILENCE 1000 CYCLONE SMART

ENGLISH

08221