Descargar Imprimir esta página

BS POOL PC Smart + Manual De Usuario página 26

Publicidad

Idiomas disponibles

Idiomas disponibles

3- ELECTRICAL CONNECTION
Important: In order to make the connections on the terminals, remove only the front
cover. To do this, pull it until it comes off the box.
It is not recommended to remove the entire casing as the keypad is connected to the
electronic board.
Fig. 1: Representation of how the cover should be removed.
3.1- NTC Kit
The NTC/1 probe kit allows you to read the water temperature. Once the probe is connected,
the temperature will be displayed on the main screen, and you will be able to activate the anti-
freezing mode.
Connect the cables to the Temp terminal block for temperature readings.
Fig. 2: Kit NTC.
26

Publicidad

loading