Socket Mobile DuraSled DS800 Manual De Usuario página 15

Note: This procedure will put the scanner in discoverable mode.
Step 1: Unpairing the scanner: Delete the Bluetooth Pairing
If the scanner is paired with a device, unpair it before trying to connect to
a different device.
a. Power on the scanner.
b. Press the scan button then power button and hold both until you hear
3 beeps.
The scanner will unpair and automatically power off. The next time you power
on the scanner, it will be discoverable.
Step 2: Remove or forget the scanner from the Bluetooth list on the host
device.
Important: Both steps above must be done to complete the unpairing.
Bluetooth Unpairing
15