Socket Mobile DuraSled DS800 Manual De Usuario página 16

Factory Reset will restore the scanner to Factory Default settings
(configured as shipped). If your scanner cannot scan the Factory Default
barcode below, then Follow the Factory Reset (button) sequence:
Scan this barcode
manually reset the scanner:
1. Turn ON the scanner.
2. Press and hold the scan button
button , while continuing to hold the scan button.
2
3. Let go of scan button after the scanner beeps once (after 15
seconds). Five confirmation tones will sound from high to low tones and
then the scanner will turn OFF.
Note: If you follow this sequence, but release the scan button too early (before
15 seconds and the beep) the Factory Reset will fail.
Factory Reset
Scan Button
, then quickly press and release the power
1
Quickly press
and release
1 the power
button
16
or follow the steps below to
Power Button
2