cecotec ENERGYSILENCE 4800 LIGHT WHITE Manual De Instrucciones página 47

- Connect the white wire from the remote-control receiver to the white wire from the fan.
Connect the red wire from the remote-control receiver to the red wire from the fan.
- Connect the yellow wire from the remote-control receiver to the yellow wire from the
fan. Connect the grey wire from the remote control receiver to the grey wire from the fan.
Connect the yellow-green ground wire to the earth wire through the terminal block.
- Connect the neutral wire to the white neutral wire of the remote-control receiver via the
terminal block. Connect the power cable to the black wire of the remote-control receiver
via the terminal block.
NOTE: before connecting any cables, make sure that you have disconnected the power.
- When you have finished connecting all the cables, place the remote-control receiver in the
recess provided for this purpose and follow the steps shown in Fig. 15.
Installing the canopy
Once the fan has been hung up, fit the canopy cover.
1.
Turn it to the correct position and screw it into place. Fig. 16
2.
Fan balancing method
NOTE: if the fan wobbles when operating, check that all screws on all parts are properly
tightened. If screws are not the problem, try the following options:
1. Change the position of the blades. Fig. 17
Interchange the position of blades 1 and 2.
a.
b. If, after doing this, you do not notice that the problem is solved, swap the position of
blades 2 and 3.
4. OPERATION
This ceiling fan is operated through the use of the remote control.
Remote control
Fig. 18
Fig. 18 key
Receiver operation indicator light.
1.
2. Buttons for switching on the fan at the desired speed. 6 speeds available to regulate the
intensity of the air flow.
Off button.
3.
4. Reverse rotation button. A motor reversing system is available to provide the summer/
winter function. Rotating in one direction, you can enjoy a pleasant breeze in summer,
ENERGYSILENCE 4800 LIGHT WHITE/BLACK/GOLDWHITE/GOLDBLACK
ENGLISH
47