Descargar Imprimir esta página

Orbegozo SV 2025 Manual De Instrucciones página 12

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SV 2025
control to position 0, put the iron on its heel and remove the
mains plug from the wall socket.
FIRST USE
• Clean the soleplate with a damp cloth.
• Fill the water tank through the filler opening (6). Help yourself with a container filling. If possible,
use distilled water or tap water to clear the water hardness 2. If your water has higher grades, use
only distilled water.
• Water battery water from the clothes dryer and water with additives (such as starch, perfume,
fabric softeners and other chemicals) should not fill in the water tank. The device will be
damaged, as this may result in residues in the steam tank. These residues, to escape the steam
outlet openings, could dirty clothes ready for ironing.
HANDLING THE PRODUCT
• Attention: only iron clothes with this device.
• Remove the possible anti-abrasion labels that may have the product in the soleplate of before
using the appliance leaves.
• Please unwind the cable completely.
IRON WITHOUT STEAM (REGULATED STEAM IN POSITION "
Place the device on top of its base (9).
Adjust the regulator of the amount of steam (4) to the "O" position
(the position is selected by orienting the roulette icon that you
want towards the buttons
Always set the temperature regulator (1) to the "0" position, before
connecting the appliance to the socket.
Select the clothes by ironing temperatures. Start with the lowest
temperature. Adjust the temperature with the temperature regulator (1):
The control lamp (2) lights up. When it turns off, the temperature for ironing has been
reached. Now you can start ironing.
After each use, remove the plug from the socket.
).
Nylon
• •
Rayon, Wool
• • •
Cotton
MAX Linen
O "
)
Low temperature
Medium temperature
High temperature
Maximum temperature
12

Publicidad

loading