Descargar Imprimir esta página

Orbegozo SV 2025 Manual De Instrucciones página 14

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

SV 2025
 When ironing at low temperatures, take care to reduce the amount of steam or iron without
steam. Selecting too low temperatures is normal to catch water from the soleplate.
SELF-CLEANING (
Half fill the water tank with water.
Heat the machine up to its maximum temperature. After the control lamp goes off remove the
machine
from the mains supply.
Now hold the iron horizontally over a sink. Turn the steam quantity control to the "
position and pull it out.
Now rock the device backwards and forwards until the tank is empty. Reinsert the control, paying
attention to the guide mechanism.
Then return the regulator to the " O " position.
Place the machine back on its stand and heat it up again. To clean the base, now iron over a clean
cotton cloth.
CLEANING AND STORAGE
Always disconnect the appliance before cleaning and let it get cold.
Clean the outside with a dry cloth.
Clean the soleplate with a damp cloth.
After use, place the regulator always the amount of steam to the position " O " and empty
the water to avoid spilling of the contents of the tank.
TECHNICAL PARAMETERS
Model
SV 2025
)
Voltage
Frequency
220-240 V
Power
50/60 Hz
2000 W
Protection
class
Ι
"
14

Publicidad

loading