Orbegozo SV 2025 Manual De Instrucciones página 13

SV 2025
STEAM IRONING
ATTENTION: STEAM IS REALLY HOT. DANGER OF BURNS
A high temperature (cotton, flax) is needed. You can adjust the amount of steam to the steam knob
(4).
Impulse steam
For the steam stroke, then press the button (5) with the icon

corresponds to the left looking at the iron from the back
When ironing at low temperatures (minimum temperature level "• •"), make sure that you reduce the
quantity of steam or iron without steam. If the temperature is too low, water may leak from the
soleplate.
FILLING THE WATER TANK
 Remove the power plug before filling water.
 Adjust governor of the amount of steam (4) to " O " (no steam) position. Open the cover of the
filler opening (6) and carefully pour water. Fill the water tank only to the MAX mark.
SPRAYER
 To moisten a space, press the button (5) on the icon of , which is identified and corresponds
to the right looking at the iron from the back.
VERTICAL STEAM
 You can use the steam function vertically.
 Note: To prevent the escape of excess water from the soleplate, operate the steam boost
button no more than 5 seconds without interruption.
 Warning: steam is hot. Danger of burns!
No steam
Small amount
Large amount
of steam
of steam
, which is identified and
13