Publicidad
Idiomas disponibles
Idiomas disponibles
Usage Method
1. Put the clean food in the trays – Do not overload the trays and
never overlap the food. Close the damper door.
2. Plug dehydrator into wall outlet, the screen and button light up
and there is a beep sound at the beginning when it starts up. All the
button and the screen light up, the screen show "8888". Three
seconds later, only "TIME/TEMP" light up, the screen shows
"0000".
3. Press the "TIME/TEMP" button, The LED screen will show
default time setting "10:00" and temp setting 70°C".Then press the
"START/STOP" button directly, motor and fan start first, then
heating element start working 5 seconds later. Set time begins to
count down, the signal ":" on LED screen flashes.
4. Press the "TIME/TEMP" button and LED screen shows the temp
value. According to actual needs, press "+" or "-" button to change
the drying temp between "35°C" and "75°C". Press "+" or "-" button
once, the temp increment or decrement is 5°C/press. If press "+" or
"-" button for a long time, then it automatically increases or decreases.
after finish setting the drying temp system, press "START/STOP", the
Publicidad
