SHERCO 125 ST-R RACING Manual De Instrucciones página 80

MAINTENANCE PROCESSES
Adjusting the throttle cable
B
80
A
C
D
Although the throttle cable's tolerance is set in-
factory, the user may adjust it.
The adjusting is making directly on the injector body.
- Inscrew the inferior nut
- Adjusting the tension by using the scroll
wheel .
B
- Tighten the nut .
A
You may also use the screw on the gas line to adjust.
- Unscrew locknut
C
- Loosen or tighten the screw
- Tighten locknut
C
desired slack.
WARNING
After adjustment, start the engine and turn the handlebar both
directions to check that there is no acceleration due to cable tension.
The throttle cable should NEVER be under tension.
The accelerator grip should have a 2- or 3-mm free section.
.
A
.
to adjust the slack.
D
back in once you have the