DragonTouch VISION 3 Manual De Usuario página 13

EN
4. Burst
Off, 3P/S, 5P/S 10P/S (Default setting: Off)
Burst lets you specify the number of consecutive shots per second, making it ideal
for capturing fast-moving activities. Once you're done configuring, return to the
preview screen. The camera will enter Burst mode.
General Settings
On the general settings screen, press the Down button to choose a setting from the
available options, then press the OK button to confirm your selection and change
the setting.
1. Exposure
-3 / -2 / -1 / 0 / 1 / 2 / 3 (Default setting: 0)
Adjust the brightness of your photos and videos. A higher exposure value creates a
brighter image, while a lower value results in a darker image.
2. White Balance
Auto / Sunny / Cloudy / Incandescent / Fluorescent (Default setting: Auto)
White Balance fine-tunes the color temperature of your videos and photos, ensuring
optimal color accuracy in both warm and cool lighting conditions.
3. Wifi
Off / On (Default setting: Off)
Choose to enable Wifi in this setting.
Tip: You can also press and hold the Wifi button to turn on Wifi in Video or Photo
Mode. The camera will then enter Wifi mode and display the Wifi information.
4. Image Rotation
Off / On (Default setting: Off)
This setting determines the orientation of your video and photos, helping to prevent
upside down footage.
Note: The user interface will be upside down when this feature is enabled.
5. Driving Mode
Off / On (Default setting: Off)
With Driving Mode enabled, if you connect the camera to the car cigarette lighter
and start your car, the camera will automatically turn on to start video recording and
save the video file at the set interval. It will save the file and automatically turn off
when you stop your car. When the SD card is full, the camera will automatically
delete the earliest videos to ensure continuous recording.
11