DragonTouch VISION 3 Manual De Usuario página 7

EN
Getting Started
Welcome to your new Vision 3 action camera. To capture videos and photos, you will
need a memory card (sold separately).
Memory Card Use
Use brand name memory cards that meet these requirements:
• Class 10 or UHS-I rating
• Capacity up to 64GB (FAT32)
Note:
1. Before using this camera, please format the memory card first. To keep your
memory card in good condition, reformat it on a regular basis. Reformatting
deletes all of your data, so be sure to transfer your photos and videos first.
2. The FAT32 format memory card will stop recording when the storage of each file
exceeds 4GB and start to record again in a new file.
3. Using a memory card with a capacity larger than what is required can lead to
complications such as failure to recognize the card. In addition, it may cause
camera malfunctions, including unresponsiveness or firmware failure.
Powering on or off
To power on: Press and hold the Power button for 3 seconds. You will hear a beep
and see the working indicator turn on. Once information appears on the display
screen, you'll know that your camera is turned on.
To power off: Press and hold the Power button for 3 seconds. You will hear a beep
and see the working indicator turn off. Once the display screen blacks out, you'll
know that your camera is turned off.
Turning Wifi on or off
To turn on: When on the preview screen, press and hold the Wifi button turn on
Wifi. Alternatively, enter the camera's system settings to enable Wifi.
To turn off: When on the preview screen, press the Wifi button to turn off Wifi.
5