DragonTouch VISION 3 Manual De Usuario página 22
Ocultar thumbs
Ver también para VISION 3:
- Manual del usuario (70 páginas) ,
- Manual del usuario (25 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
EN
2. Remove another 4 screws on the remote's circuit board.
3. Lift the circuit board and slide out the battery, as shown below.
Note:
Avoid rotating the circuit board to prevent reversing the remote control buttons.
4. Install the new battery, keeping the "+" pole facing up.
5. Install all the 4 screws back onto the circuit board.
6. Install all the 4 screws back into the cover.
20
Publicidad
