Publicidad
Idiomas disponibles
Idiomas disponibles
Filter reset
You can replace the filter even before filter replacement alert (
replacing a filter, you need to reset the filter lifetime counter manually.
1
Press the power button
2
Within 10 seconds after power on, press and hold the mode switch button
reset the filter lifetime counter.
7
Storage
1
Turn off the air purifier and unplug from the power socket.
2
Clean the air purifier, air quality sensor and the surface of the filter (see chapter 'Cleaning').
3
Let all parts air dry thoroughly before storing.
4
Wrap the filter in air tight plastic bags.
5
Store the air purifier, filter in a cool, dry location.
6
Always thoroughly wash hands after handling a filter.
8
Troubleshooting
This chapter summarizes the most common problems you could encounter with the appliance. If you
are unable to solve the problem with the information below, contact the Consumer Care Center in your
country.
Problem
The appliance does not
work even though it is
plugged in.
The airflow that comes
out of the air outlet is
significantly weaker
than before.
The air quality does not
improve, even though
the appliance has been
operating for a long
time�
to turn on the appliance.
Possible solution
The filter replacement alert is flashing but you have not replaced the
•
corresponding filter. As a result, the appliance is now locked. In this case,
replace the filter and reset the filter lifetime counter.
•
The surface of the filter is dirty. Clean the surface of the filter (see the
chapter "Cleaning").
•
Check if the packing material is removed from the filter.
•
Make sure that the filter is properly installed.
•
The air quality sensor is dirty or wet. Clean the air quality sensor (See the
chapter "Cleaning").
•
Room size is large or the outdoor air quality is poor.
For optimum purification performance, please close the doors and
windows when operating the air purifier.
•
There are indoor pollution resources. For instances, smoking, cooking,
incense.
•
Filter reaches the end of life. Replace the filter with a new one.
) displays on the screen. After
for 5 seconds to
EN
11
Publicidad
