Publicidad
Idiomas disponibles
Idiomas disponibles
Connecting the hob to the mains power supply (F10)
Before connecting the hob to the mains power supply, check that:
1. The domestic wiring system is suitable for the power drawn by the hob.
2. The voltage corresponds to the value given in the rating plate.
3. The power supply cable sections can withstand the load specified on the rating plate.
4. The installation is fitted with an efficient earthing connection in line with current regulations
and law. The earth connection is a legal requirement.
-
To connect the hob to the mains power supply, do not use adapters, reducers, or
branching devices, as they can cause overheating and fire.
-
Where the appliance is not supplied with a cable or plug, use suitable material for the current indicated
on the rating plate and for the operating temperature. The cable must never reach a temperature of more
than 50 °C above the ambient temperature.
-
The power supply should be connected in compliance with the relevant standard, or a single-pole
circuit breaker .
-
The installer must ensure that the correct electrical connection has been made and that it is com-
pliant with safety regulations.
-
The cable must not be bent or compressed.
60819760.31.08.2020.indd 30
60819760.31.08.2020.indd 30
8/10/20 10:34
8/10/20 10:34
Publicidad
