Publicidad
Idiomas disponibles
Idiomas disponibles
HIAC 9703+ Liquid Particle Counter
Installation
Install the small-vial clamp
The optional small-vial clamp connects to the docking module with 2 screws.
Connect the power cord
A power supply unit is used to supply power to the instrument.
Remove the magnetic stirrer
The magnetic stirrer in the docking module can be removed if necessary.
1
Pull the tab on the docking module away from the instrument to remove the module.
2
Remove the four screws on the bottom plate of the module. Separate the bottom plate from the
module enclosure.
12 / 22
DOC026.98.80097, Edition 7
Publicidad
