Beckman Coulter HIAC 9703+ Manual Del Usuario página 13

3
Remove the screw that holds the magnet to the motor shaft. Hold the shaft with pliers so that
the shaft does not move.
4
Remove the magnet and install the screw. Hold the shaft with pliers so that the shaft does not
move.
5
Put the bottom plate on the module enclosure and install the four screws.
User interface
The buttons on the front panel allow the user to operate the syringe, sample probe and stirrer. Refer
to Figure 6,
Figure 6 Front panel
1. Syringe controls
2. Stirrer speed (RPM)
3. Power switch
DOC026.98.80097, Edition 7
Table 1 and Table 2.
4. Stop button
5. Sample probe controls
6. LED status indicators
HIAC 9703+ Liquid Particle Counter
User interface
13 / 22