Beckman Coulter HIAC 9703+ Manual Del Usuario página 16

HIAC 9703+ Liquid Particle Counter
Attach the syringe
Attach the syringe
The syringe drive mechanism must be at the bottom position to attach or remove the syringe.
Figure 7 Attach the syringe
1. Plunger bolt
2. Syringe
1
Push the
2
Push the
point. Refer to
3
Loosen and remove the plunger bolt from the syringe drive.
4
Hold the syringe and push the bolt through the plunger hole.
5
Push the bolt in the syringe drive hole and turn the bolt by hand to tighten.
6
Pull the syringe barrel up and install the syringe threads in the valve.
7
Turn the syringe by hand to tighten.
NOTE
Do not overtighten.
16 / 22
3. Syringe drive
4. Valve
switch to turn the instrument on.
ON/OFF
button under the syringe compartment to set the plunger bolt at the lowest
LOAD
Figure 7.
DOC026.98.80097, Edition 7